The latest batch of thirteen drill holes by Iamgold (IMG-T, IAG-X) has extended to the southeast the Quimsacocha gold-copper-silver deposit, 40 km southwest of Cuenca in Azuay province, Ecuador.
The best result came in hole no. 226, which yielded multiple mineralized intervals, including a 25.4-metre stretch (beginning 154.3 metes below surface) grading 17.9 grams gold and 49.5 grams silver per tonne plus 1.7% copper.
Other selected results include:
- Hole 227 – 4 metres (from 144 metres) averaging 10.1 grams gold, 53.9 grams silver and 0.5% copper;
- Hole 228 – 1.1 metres (from 26 m) running 2.2 grams gold, 2.9 grams silver and 1.7% copper;
- Hole 230 – 10 metres (from 156 m) of 7.6 grams gold, 79.8 grams silver and 0.56% copper, and 4 metres (from 201 m) of 11.6 grams gold, 140.5 grams silver and 0.5% copper;
- Hole 239 – 44 metres (from 139 m) averaging 3.5 grams gold, 40 grams silver and 0.1% copper, and 34.7 metres (from 223.2 m) of 2.3 grams gold, 22.6 grams silver and 0.1% copper.
The remaining holes returned gold grades of 1 to 15 grams, silver grades of 4.5 to 20 grams, and copper grades less than 1% over core lengths of 5 to 80 metres. Two holes were abandoned due to difficulties with the drill rig.
Results from holes nos. 224 to 228, and 230 will be included in the independent resource calculation by Roscoe Postle Associates, due out later this month.
Iamgold CEO Joe Conway says the latest results include holes south of the existing resource, indicated the pending resource estimate has the potential to grow.
Drilling earlier this year established that the D1 zone and Loma Larga zone to the south represent a single mineralized structure.
Based on the encouraging results, the company has boosted its 2005 exploration and drilling budget by 36% to $5.3 million.
In late August, SGS Lakefield Research completed metallurgical tests on nine samples with grades ranging from 5 to 42 grams gold, 28 to 131 grams silver, and 0.3 to 5.4% copper. Composite samples were also tested.
SGS’s work concluded that pressure oxidation followed by cyanidation of the residue recovered 99% of the gold and copper from enargite, the main copper-bearing mineral in the Quimsacocha deposit. Low reagent consumption was also indicated.
Initial flotation tests returned gold recovery rates of 94% to 97%, and up to 99% for copper. Subsequent pressure oxidation and cyanidation also yield recovery rates in excess of 95%. Direct cyanidation leach tests continue.
Be the first to comment on "Iamgold grows Quimsacocha"